880547-5024S Garrett G47-1650 80|109MM

  • 45 000 kr

880547-5024S Garrett G47-1650 80|109MM  ( Made to order 1-6  weeks ) News + upgrades on the new G47-1650• Outline  interchangeable with GTX Gen I

I lager.
Article Number: 880547-5024S
Share

880547-5024S Garrett G47-1650 80|109MM  ( Made to order 1-6  weeks ) News + upgrades on the new G47-1650

• Outline  interchangeable with GTX Gen II turbos• Supports up to 1650 flywheel  horsepower• 80mm | comp ind | 109mm comp exd• High flow, high efficiency  GTX Gen II comp aero• G-Series turbine wheel aero increases performance  compared to GTX47 Gen II• Flow: up to 20% more• Spool: up to +9%  (estimated by flow, efficiency, and inertia)• One-piece lightweight  aluminum center hsg/backplate• Outlet length on T6 turbine hsg reduced  17mm compared to GTX to optimize weight reduction

G47-1650 Part Number: 880547-5024S

WARNING:  Maximum allowable turbocharger speed is 102.5krpm. The use  of this  product above max turbocharger speed is at the owner’s risk, and  can  result in damage and premature failure. To protect the turbocharger   from overspeed when operating, a speed sensor can be installed into the   compressor housing to monitor shaft speed. Sensors sold separately.  (click here for details)

Performance results of this product are  highly dependent upon your  vehicle’s modifications and  tuning/calibration. The horsepower numbers  represented above are  calculated based strictly on choke flow of the  compressor map (total  turbo capability), which represents the potential  flywheel horsepower.

Compressor Map & Exhaust Flow Chart

                            

The latest Garrett technologies featuring many advanced features.

                                                                                                                                                                                                                                    

Compressor Map

                                                                                                                                                                                                                           

Exhaust Flow Chart

                                                                                                                                                                                                                                                                                                        

G-Series G47 Configurations

G  Series G47 is available in 4 total configurations. 76mm 109mm |  80mm  109mm | 80mm 120mm | 88mm 120mm compressor measurements. You can  click  the hyperlinks to go directly to those product pages. All G-Series  G47  models are interchangeable meaning the supercore can be swapped  into  any turbine housing out without having to reconfigure any other  turbo  kit parts.

 

                                        

                                            

                                                                                                                

G47 Turbine Housing Kits

G-Series  G47 turbine housing kits are available in four A/R. 0.96 A/R  | 1.08  A/R | 1.23 A/R | 1.39 A/R stainless steel housings with T6 inlet   flange. The 1.39 A/R T6 turbine housing flows 64 LBS/MIN of air which   is a 20% increase over the GTX47 turbine wheel.